Details
Call (706) 207-4140 for Shipping and Availibility
Poison Spyder Customs BFH_ front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH_ bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH_ bumper features an integrated winch mount and one-piece design. Customize your BFH_ bumper with several different Stinger/Bar options, Winch Fairlead Mount, and Heavy Duty Shackle Tabs: The optional Brawler Bar is a lower-profile Stinger, fashioned after the 2-bend Stinger featured on our Original RockBrawler bumper for JK. The Brawler Bar features the most versatile combination of trail protection and a lower profile for easier access to the engine compartment, fitment into garages and trailers, etc. Plus it looks bad-ass! The Brawler Bar extends 7.4" forward from the front edge of the bumper, and 9.8" high from the top surface of the bumper. The optional Trail Stinger_ is similar in proportion to the famous Poison Spyder Trail Stinger_. This time-honored design has proven itself on hundreds of Jeeps over the past decade, providing simple, clean lines along with a measure of forward-flop protection. The Trail Stinger_ extends 13.4" forward from the front edge of the bumper, and 17" high from the top surface of the bumper. The optional Comp Stinger_ for the BFH_ front bumper matches the lines of our stand-alone Comp Stinger_s. For those getting into the more hard-core aspects of the sport, the Comp Stinger_ provides even better forward-roll prevention, as well as increased protection of the radiator area and engine compartment in the event of a rollover. The Comp Stinger_ extends 17.6" forward from the front edge of the bumper, and 21.9" high from the top surface of the bumper. The optional Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH_ bumper to result in zero loss in approach angle. The optional Winch Fairlead Mount is a separate piece (bolt-on, not weld-on) that mounts between your winch and the BFH_ bumper to provide a secure mounting surface for the winch fairlead (find it in the "Related Items" section below). The JK BFH Disco Skid is an optional bolt-on skid plate to protect the factory electric swaybar disconnect motor on JK's. In stock form this motor hangs low, making it vulnerable to rocks and trail hazards. The BFH Disco Skid protects it, but also comes with hardware and instructions to rotate the motor upward, further out of harm's way. Like the BFH bumper, the Disco Skid is made of CNC laser-cut 3/16" plate steel and is designed to be a great looking, functional addition to the JK BFH bumper. Whether you keep it simple or customize it with all the options, the BFH_ front bumper is a serious bumper for hardcore wheeling!
Poison Spyder Customs BFH_ front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH_ bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH_ bumper features an integrated winch mount and one-piece design. Customize your BFH_ bumper with several different Stinger/Bar options, Winch Fairlead Mount, and Heavy Duty Shackle Tabs: The optional Brawler Bar is a lower-profile Stinger, fashioned after the 2-bend Stinger featured on our Original RockBrawler bumper for JK. The Brawler Bar features the most versatile combination of trail protection and a lower profile for easier access to the engine compartment, fitment into garages and trailers, etc. Plus it looks bad-ass! The Brawler Bar extends 7.4" forward from the front edge of the bumper, and 9.8" high from the top surface of the bumper. The optional Trail Stinger_ is similar in proportion to the famous Poison Spyder Trail Stinger_. This time-honored design has proven itself on hundreds of Jeeps over the past decade, providing simple, clean lines along with a measure of forward-flop protection. The Trail Stinger_ extends 13.4" forward from the front edge of the bumper, and 17" high from the top surface of the bumper. The optional Comp Stinger_ for the BFH_ front bumper matches the lines of our stand-alone Comp Stinger_s. For those getting into the more hard-core aspects of the sport, the Comp Stinger_ provides even better forward-roll prevention, as well as increased protection of the radiator area and engine compartment in the event of a rollover. The Comp Stinger_ extends 17.6" forward from the front edge of the bumper, and 21.9" high from the top surface of the bumper. The optional Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH_ bumper to result in zero loss in approach angle. The optional Winch Fairlead Mount is a separate piece (bolt-on, not weld-on) that mounts between your winch and the BFH_ bumper to provide a secure mounting surface for the winch fairlead (find it in the "Related Items" section below). The JK BFH Disco Skid is an optional bolt-on skid plate to protect the factory electric swaybar disconnect motor on JK's. In stock form this motor hangs low, making it vulnerable to rocks and trail hazards. The BFH Disco Skid protects it, but also comes with hardware and instructions to rotate the motor upward, further out of harm's way. Like the BFH bumper, the Disco Skid is made of CNC laser-cut 3/16" plate steel and is designed to be a great looking, functional addition to the JK BFH bumper. Whether you keep it simple or customize it with all the options, the BFH_ front bumper is a serious bumper for hardcore wheeling!
Additional Information
| Manufacturer | Poison Spyder |
|---|---|
| Chassis | JK, JKU |
| Manufacturer SKU | 17-16-020-DS |
Write Your Own Review
Compare Products
You have no items to compare.
